Betekenis van:
absolute scale

Voorbeeldzinnen

1. For instance, high structural barriers may be found to exist when the market is characterised by absolute cost advantages, substantial economies of scale and/or economies of scope, capacity constraints and high sunk costs.
2. The indicating dial of the opacimeter shall have two measuring scales, one in absolute units of light absorption from 0 to ∞ (m-1) and the other linear from 0 to 100; both scales shall range from 0 at total light flux to full scale at complete obscuration.
3. The absolute accuracy of qmdew and qmdw is within ± 2 per cent of full scale, the maximum error of the difference between qmdew and qmdw is within 0,2 per cent, and the linearity error is within ±0,2 per cent of the highest qmdew observed during the test.
4. the absolute accuracy of qmdew and qmdw is within ± 2 % of full scale, the maximum error of the difference between qmdew and qmdw is within 0,2 %, and the linearity error is within ± 0,2 % of the highest qmdew observed during the test.
5. The absolute accuracy of GTOTW and GDILW is within ± 2 % of full scale, the maximum error of the difference between GTOTW and GDILW is within 0,2 %, and the linearity error is within ± 0,2 % of the highest GTOTW observed during the test.
6. Rotary input type shaft absolute position encoders having any of the following: 1. A resolution of better than 1 part in 265000 (18 bit resolution) of full scale; or 2. An accuracy better than ± 2,5 seconds of arc. 3A002 General purpose electronic equipment, as follows: a. Recording equipment, as follows, and specially designed test tape therefor:
7. A NO span gas having a concentration of 80 to 100 per cent of full scale of the normal operating range must be passed through the (H)CLD and the NO value recorded as D. The NO span gas must then be bubbled through water at room temperature and passed through the (H)CLD and the NO value recorded as C. The analyser's absolute operating pressure and the water temperature must be determined and recorded as E and F, respectively.
8. A NO span gas having a concentration of 80 to 100 per cent of full scale of the normal operating range must be passed through the (H)CLD and the NO value recorded as D. The NO span gas must then be bubbled through water at room temperature and passed through the (H)CLD and the NO value recorded as C. The analyser's absolute operating pressure and the water temperature must be determined and recorded as E and F, respectively. The mixture's saturation vapour pressure that corresponds to the bubbler water temperature F must be determined and recorded as G. The water vapour concentration (H, in %) of the mixture must be calculated as follows: